CasaDelGato - Images from the House of the Cat

Home > Electric Vehicle > Ford F250 EV Conversion > Flywheel Mount

Click to view full size image

Adapter Plate alignment finished

Then we slid on the Motor adapter plate.
This allowed us to drill the holes to bolt the 2 plates together, and put in a couple of locating pins between them so they can be taken apart and re-assembled without shifting.

2009-01-13_19-54-54.JPG 2009-01-13_19-57-54.JPG 2009-01-13_19-58-30.JPG 2009-02-14_12-53-28.JPG 2009-02-15_17-09-34.JPG

Rate this file (No vote yet)

File information
Album name:casadelg / Flywheel Mount
Keywords:Electric Vehicle Flywheel Adapter
Filesize:729 KiB
Date added:Feb 13, 2009
Dimensions:2816 x 2112 pixels
Displayed:2346 times
DateTime digitized:2009:01:13 19:58:30
Digital Zoom Ratio:0
EXIF Image Height:2112 pixels
FlashPix Version:version 1
Gain Control:0
Image Adjustment:NORMAL
Manual Focus Distance:0 m
Noise Reduction:OFF
Resolution Unit:Inch
Y Resolution:300 dots per ResolutionUnit
YCbCrPositioning:Datum Point
Favorites:Add to Favorites