CasaDelGato - Images from the House of the Cat

Most viewed
DSCF0001.JPG
Before Cage 110810 viewsMy Living room before the cage was setup
2008-04-18_15-28-44.JPG
Pulling the engine10448 viewsRemoving the 460cui gas engine. (Having a forklift really made this easier.)
All 762 pounds of it!
2009-02-14_12-53-28.JPG
Position motors9468 viewsMotors were mounted to the transmission, then lifted in from below.
Transmission was then bolted to it's mounts, and the motors placed on blocks to keep everything in position
DSCF0013.JPG
9296 views
2009-03-24_16-13-34.JPG
Battery Box Bottom9277 viewsThis is the bottom of the battery box. It is 3/4" plywood with a 2x2 edge frame.
The colored boxes are pieces of plywood cut to the size of Golf Cart batteries.
DSCF0014.JPG
9146 views
2009-03-24_16-15-18.JPG
8731 viewsThis shows how there will be 6 batteries across at the back. (there are 8 across at the front)
2009-02-15_17-09-34.JPG
Building Motor Mounting Framework8539 viewsWe decided it was easiest to juts build the motor mounting framework in place. Carefully cut pieces and clamp them in place, then tack weld it all together.
DSCF0016.JPG
8171 views
DSCF0006.JPG
8156 views
DSCF0008.JPG
8089 views
2009-02-21_13-48-38.JPG
Motors Installed7975 viewsEverything is in and bolted down. The framework is mounted to the original rubber engine mounts that used to support the 460cui Gas Engine.
1718 files on 144 page(s) 1