Battery Hold Down Post Nuts3650 viewsI put a little weld in the bottom of each hold down flange nut so that the post can't be screwed in too far.
This is to prevent it being screwed down through the covering fiberglass at a later date.
|
|
Battery Box Mount3360 viewsThere are 2 5/8" bolts at the back of the box to hold the box down to the bed. To keep these from pulling through the wood/fiberglass box, I put a long 1/4" thick steel plate behind each bolt.
|
|
Battery Box Mount 3319 viewsThere are 2 more 5/8" bolts at the front of the box, with another steel plate for them.
|
|
3103 views2 Dividers and front/back panels added.
|
|
3031 viewsShows were the 6 rows and 2 dividers will be.
|
|
2888 views
|
|
2791 views
|
|
2773 views
|
|
2419 viewsAll walls installed.
Note that all wood-wood mounting is by gluing them together, and then using deck screws as well.
|
|
|
|
|
|